saba schwarzwald w5

      You need:

      2 banana plugs 4mm
      1 cable with 3.5mm jack
      2 resistors 4,7k

      Mass you take both channels together to a banana plug.
      The two channels each receive a 4.7k resistor and are then grouped together in the other banana plug.

      Now you have a stereo mono adapter and can connect it to the TA port.

      When connecting several devices, separated by a switch you need a Galvanic isolation.
      Available in specialist shops.
      Greeting Markus
      Wenn nichts mehr geht, geht immer noch etwas!!!!

      MRPower schrieb:

      You need:

      2 banana plugs 4mm
      1 cable with 3.5mm jack
      2 resistors 4,7k

      Mass you take both channels together to a banana plug.
      The two channels each receive a 4.7k resistor and are then grouped together in the other banana plug.

      Now you have a stereo mono adapter and can connect it to the TA port.

      When connecting several devices, separated by a switch you need a Galvanic isolation.
      Available in specialist shops.
      Greeting Markus


      many thanks
      i think use two resistor . stereo to mono
      If i can buy one more saba radio. i can use two saba radio W5 by stereo music