SABA 9141 tc spare parts research

va2hdd · 19. Juli 2021, 21:34

Halo !

Just for information, Canada is divided in 10 provinces (roughly like Landers) and 3 territories. The amateur call signs in Canada start with VE or VA, followed with a number specific to each province, so VE0 would be in Newfoundland, VE1 in east part (NB, NS and PEI), VE2 for Québec, 3 for Ontario, etc... Sailors have call signs starting with VO, only when they are sailing. So I would become VO2 HDD when sailing and go back to VA2 HDD when I'm back home. Strange but so very Canadian !!

Claude

dl2jas · 19. Juli 2021, 22:22

va2hdd de dl2jas

Interesting!
I only know VA to VE, VO for sailors is new for me.

In Germany we have some special call signs, too.
DA is an old tradition for interestet SWLs, exchange of qsl cards via bureau possible.
The 0, e.g. DK0TU, is for club stations.
DN is only for schooling, there is always an OM in the background.

73 de dl2jas

dl2jas · 20. Juli 2021, 02:51

Dear Claude!

Now you have an avatar, picture.
My one is also UHER, series Report Monitor.
It seems to be a UHER Logic with omega drive, SG631.
I have also a SG631, very good machine if in good condition.

Be careful with the tapes!
You will have very good results with BASF LPR35, back coated tape.
Because of the omega drive you need back coated tapes for low W&F.
Excellent is MAXELL XLI but the machine needs a new alignment.

Andreas, DL2JAS

va2hdd · 20. Juli 2021, 03:16

Halo Andreas.

I would dream to find an SG631 in good condition, because not many SG631's were sold here in Canada; even in US also I suppose.

I attended the Friedrichshafen Hamfest twice but I had no luck.

I keep looking !

73 de Claude VA2 HDD

dl2jas · 20. Juli 2021, 03:33

Claude, ask me per email!

Andreas

YogiGSX · 20. Juli 2021, 08:34

Hello @all,

I see, you're haven fun

What about the switch, Claude? Did you see my PM?

YogiGSX · 20. Juli 2021, 08:43

Pics

YogiGSX · 20. Juli 2021, 08:51

I left it with the complete wiring / plugs, speaker sockets and the mounting-bracket - just in case you can't use it an someone wants it for the MI 215

YogiGSX · 21. Juli 2021, 16:13

Hi @all,

is there anything happening "behind the curtains?

@va2hdd Claude, r u still interested?

va2hdd · 16. März 2022, 01:28

Hi all !
I'm back to my hobby after a long and unplanned break.
I will soon resume working on my 9141 tc and my 9241 receivers.
I will keep you informed as I progress
Claude

YogiGSX · 22. April 2022, 07:25

Hi Claude,
pls see my pm.
Regards!

va2hdd · 28. Februar 2023, 01:19

Hallo to all members !

After much work I was able to fully repair my 9141 tc.

The final list of parts I had to replace : power switch (burnt contacts), the power relay (broken contact), the filter capacitors (replaced with inappropriate parts by previous owner), I had to clean the contacts on module 15 (Netzteil), change the "Funktions Platte 40" as the muting switch no longer stayed pushed in when activated; and last the speaker switch (Thanks to Yogi GSX ! :thumbup:

).
On the remote I had to replace both 220uF capacitors, the BSR50 transistor and the three IR LED's.
It now plays perfect; I'm very happy with my purchase.

I will post pictures when I figure out how !

Claude

dl2jas · 28. Februar 2023, 01:33

Dear Claude, congratulations!

The pictures...
Click "Erweiterte Antwort".
The next button to use is "Dateianhänge" and then "Hochladen".
Maximum file size per picture is 1 MB.

73 es 55 de DL2JAS

va2hdd · 1. März 2023, 04:26

Hallo to all members.

Two pictures of my repaired and working 9141 tc. It was a long journey ! Thank you to YogiGSX and dl2jas for help and advice.
To enjoy my work I connected a pair of Dynaco A25's with the SABA they sound even better then usual.

On the third picture you can see what I think is abrasion marks on the finish. By experience do you have any suggestion on how to hide it ?

Thank you for you help and 73 to DL2JAS !

Claude VA2 HDD

va2hdd · 2. März 2023, 16:56

Hallo to all members.
The contacts on the power switch were very worn, see attached picture. Do you see the same problem in Europe or is it because of the higher current in North America with 120 V mains ?

Regards,

Claude VA2 HDD

va2hdd · 7. März 2023, 05:11

Hallo to all members.

Last two pictures before I move to my next project. Inside view, the new filter capacitors and the power relay are inside the red circles; and close up of one of the two differences between European and US version of the 9141 tc. First 120 V power transformer and last the "US" stamp on the ID sticker inside. A very small difference indeed !

73 from Claude VA2 HDD

va2hdd · 11. Mai 2023, 13:04

Hallo to all members.

I need another information to really finish my repair of my 9141tc. Can a member please take a picture and also measure the plastic feet under a 9141 tc ? There is nothing under mine, so I suspect there were lost by the previous owner.

Thank you and best regards,

Claude

kugel-balu · 11. Mai 2023, 18:08

Dear Claude,

yes, they are normally gone, pulverised or worse ... and I can only recommend to use some felt pads instead. I use 4-5 for the front bar, each about 10 mm in diameter and 3-5 mm thick, and another 2-3 for each side bar. With this, the 9141 stands perfectly, makes no marks on the furniture, and nothing ever dissolves again ...

Cheers,

Michael

va2hdd · 23. Mai 2023, 05:36

Hallo Michael.

From your answer I suspect that the plastic from the original feet turns into a sticky, gooey stuff ? As if the plastic wants to turn back into dinosaurs !

Thank you for the provided information, I will select appropriate replacement feet.

Thank you and best regards,

Claude

kugel-balu · 23. Mai 2023, 11:37

Yes, they are never usable any more these days ... so, replacements are needed. As a matter of fact, I just completed the revision of a 9141, and again used felt pads.

Michael

SABA 9141 tc spare parts research

Repaired ! SABA 9141 tc

Power switch with burned out contacts

Inside view

Benutzer online 3